12 to 24 VDC, 24 VAC, Preset Counter/Tachometer, 2 step, 48 mm x 48 mm, 6 digit, No-voltage/Voltage input selectable=>No-voltage (NPN)/Voltage input (PNP) selectable,Contact output, Memory backup

Código	H7CX-AWD1-N
Fabricante	Omron
Function	1 Stage Preset Counter, 2 Stage Preset Counter, Total Preset Counter, Batch Counter, Dual Counter, Twin counter, Tachometer
Preset stages	2 step
Rated supply voltage	24 VAC 50/60 Hz 12 to 24 VDC (Ripple 20% max.)
Operating voltage range	85 to 110% of rated supply voltage (90 to 110% at 12 to 24 VDC)
Power consumption	DC: Approx. 4.7 W (at 12 to 24 VDC) AC: Approx. 7.2 VA (at 24 VAC)
External power supply	12 VDC (±10%) 100 mA（Load reduction is required at DC input)
Count range	-99999 to 999999
Max. counting speed	30 Hz/10 kHz (switching)
Minimum input signal width	30 Hz: 16.7 ms 10 kHz: 0.05 ms
Input mode	Increment decrement or increment/decrement (UP/DOWN A (command input), UP/DOWN B (individual input) and UP/DOWN C(quadrature input))
Output modes	N, F, C, R, K-1, P, Q, A, K-2, D, L, H
One-shot output time	0.01 to 99.99 s variable
Reset system	External, manual and automatic reset (internal according to C, R, P and Q mode operation)
Input mode	Independent measurements for 1 or 2 inputs, differential input for 2 inputs, absolute ratio for 2 inputs, and error ratio for 2 inputs. (selectable)
Pulse measurement method	Periodic measurement, Pulse width measurement
Max. counting speed	30 Hz 1-input mode: 10 kHz Except 1-input mode: 5 kHz
Minimum input signal width	30 ms(Pulse width measurement (30 Hz)) 0.4 ms (1-input mode: 0.2 ms)(Pulse width measurement (5 kHz/10 kHz))
Sampling period	Periodic measurement (30 Hz): 200 ms min. Periodic measurement (5 kHz/10 kHz): 200 ms min./Continuous (minimum interval of 10 ms) Pulse width measurement: Continuous (minimum interval of 10 ms)
Measuring ranges	Periodic measurement (30 Hz): 0.001 to 30.00 Hz Periodic measurement (5 kHz/10 kHz): 0.01 to 5 kHz (1-input mode: 0.001 Hz to 10 kHz) Pulse width measurement (30 Hz): 0.030 to 999999 s Pulse width measurement (5 kHz/10 kHz): 0.0004 to 999999 s (1-input mode: 0.0002 to 999999 s)
Output modes	2-input individual measurement: Upper limit/ lower limit Except 2-input individual measurement: Upper and lower limit/ area/ upper limit/ lower limit
Input signal	CP1, CP2, Reset 1, Reset 2
Input method	No-voltage (NPN)/Voltage input (PNP) selectable
No-voltage input (No-contact input）	Short-circuit (ON) impedance: 1 kΩ max. (Leakage current (0 Ω): Approx. 12 mA) Residual voltage: 3 V max. Open circuit impedance: 100 kΩ min.
No-voltage input (Contact input）	Use a contact which can adequately switch 5 mA at 10 V.
Voltage input	Hight level: 4.5 to 30 VDC Low level: 0 to 2 VDC (Input resistance Approx. 4.7 kΩ)
Contact input	Use a contact which can adequately switch 5 mA at 10 V.
Reset time External reset	1 ms/20 ms (selectable)
Contact output	Contact form: SPST-NO+SPDT Switching capacities: 3 A at 250 VAC/30 VDC, resistive load (cos phi=1) Minimum applicable load: 10 mA at 5 VDC (failure level:P reference value)
Display method	7-segment negative transmissive LCD
Digits	6 digit
Character height	Count value: 10 mm (Red, green or orange programmable) Set value: 6 mm (green)
Prescaling function	0.001 to 99.999
Decimal point adjustment	Rightmost 3 digits
Key protection	Key protect Switch
Memory backup methods	Method: EEP-ROM, Number of rewite: 100,000 operations min., Service life: 10 years min.
Ambient temperature (Operating)	-10 to 55 ℃ (with no freezing or condensation) Close mounting: -10 to 50 ℃ (with no freezing or condensation)
Ambient temperature (Storage)	-25 to 70 ℃ (with no freezing or condensation)
Ambient humidity (Operating)	25 to 85% RH
Insulation resistance	Between current carrying terminals and exposed non-current carrying metal parts: 100 MΩ min. (at 500 VDC) Between non-continuous contacts: 100 MΩ min. (at 500 VDC)
Dielectric withstand voltage	Between current carrying metal parts and non-current carrying metal parts: 2000 VAC 50/60 Hz 1 min Between operating power circuit and input circuit: 1000 VAC 50/60 Hz 1 min Between control output, and power supply/input circuit: 2000 VAC 50/60 Hz 1 min Between non-continuous contacts: 1000 VAC 50/60 Hz 1 min
Impulse withstand voltage	Between power terminals: 1 kV Between current carrying terminals and exposed non-current carrying metal parts: 1.5 kV
Noise immunity	Between power terminals: ±1.5 kV Between input terminals: ±600 V square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1-ns rise)
Static immunity	Mulfunction: 8 kV, Destruction: 15 kV
Vibration resistance	Destruction: 10 to 55 Hz, 0.75 mm single amplitude each in 3 directions for 2 h Malfunction: 10 to 55 Hz 0.35 mm single amplitude each in 3 directions for 10 min
Shock resistance	Destruction: 300 m/s2, 3 times each in 3 axes each directions Malfunction: 100 m/s2, 3 times each in 3 axes each directions
Life expectancy	Electrical: 100,000 operations min. (3 A at 250 VAC, resistive load, 23 ℃) Mechanical: 10 million operations min.
Degree of protection	Case front: IEC IP66, UL508 Type 4X (indoors) (when using the Y92S-29 Waterproof Packing)
External connection method	Screw terminal
Case color	Black (Munsell N1.5)
Accessories	Flush mounting adapter, Waterproof packing, Terminal Cover, Label for DIP switch settings
Weight	Approx. 130 g

Ancho: N/A

Alto: N/A

Profundo: N/A

Peso: N/A

Términos de entrega: N/A